Alkaline water is simply water with a pH higher than 7.
Water generally starts to lose its alkalinity after 24 hours, but this can vary depending on how the water is stored and the temperature the water is kept in.
Water loses it alkalinity in general over 18-24 hours, but this depends on the methods used to alkaline the water, the amount of pollutant particles surrounding the alkaline water and what temperature the water is kept in. Air carries PM2.5 and PM10 particles in it, so as soon as you unseal an alkaline water bottle, air gets inside the bottle and begins reducing the alkalinity of the water.
At least pH level 7.365.
The Calcium Ionized Clay.
pH level 8 - 8.5.
We recommend you refill the Gentoo daily to ensure the water alkalinity is high and calcium residue doesn’t build up making it difficult to clean.
Generally you can tell whether the water is being filtered well by how fast it passes through the filters. Gentoo filters are very effective in filtering water. Depending on the water quality being filtered it can take 2 to 8 minutes to filter.
Yes, the Gentoo filters could removes up to 98% of fluoride. This will vary depending on the water source, alkalinity and age of filter.
It is important that you follow the instructions and prepare the filter properly before use. The filter should be kept moist at all times therefore we recommend that the jug is kept full of water.
As the water is exposed to the air it will eventually go stale, we recommend recycling the water every day to maintain freshness and prevent bacteria growth. Recommended period is within 48 hrs.
It is not necessary to refrigerate the water.
Yes, you can. However, it will alter the effectiveness and the life span of the filter as the filters are specifically manufactured for treated tap water.
Yes, we recommend keeping the jug full of water; this will prevent the filter from drying out.
The media we use is activated alumina. The process works by ion exchange, as the water flows through the filter it comes into contact with the media (activated alumina), the fluoride is attracted to the activated alumina and is absorbed.
Activated Alumina is generally specific to fluoride and is probably the most commonly used fluoride removal technology today.
This process is known to remove up to 98% of the fluoride in water.
The jug body is made of hand-blown borosilicate glass. It is reusable, safe, environmentally friendly and toxin-free for your clean tasting water.
Press the start button continuously for up 8 seconds, the indicator display should start flashing and after about 5 seconds the display will stay on. You may need to repeat this process a few times. If the indicator still doesn’t turn on please contact Ecobud customer service for further advice.
Please note, the electronic Indicator is not connected nor has any bearing on the filtering process of your jug. You can still safely use the jug even without a working indicator.
Replacement needed after using the filter for 3 months of usage OR 600 litres of usage, which ever comes first.
No, it is a seal so it must remain on the filter.
Yes, the filters are recyclable. Depending on your council, they can be dropped to your local resource recovery centres for free or placed in your recycling bin. Please check with your local for further information.
[email protected] Got a question? Leave us a message and we'll get back to you.
Contact Us
1300 886 373 MONDAY - FRIDAY 9:00AM TO 4:30PM (AEST)
Join ecobud in our mission to build a better world through cleaner water.
Click Here to Register